We should understand that the use of stainless steel laser cutting machine in industry should be quite extensive, and it is fully utilized in many fields, which is very good for the development of this equipment in the market. Therefore, we need to pay more attention to it. Especially in winter, the cold weather is a great harm to the use of stainless steel laser cutting machine. Therefore, we must pay attention to the antifreeze operation of stainless steel laser cutting machine in winter.
Anti-freezing operation of stainless steel laser cutting machine in winter mainly includes:
First of all, the temperature. Although the influence of temperature on the stainless steel laser cutting machine is not particularly large, because many users will add butter to the screw rod, they will definitely forget to clean it in winter, resulting in the inability to move every time they start the machine. For example, the winter in the north is very cold, and the temperature in the workshop will be very low. Although the machine with oil will still not move. At this time, we should ensure that the temperature in the workshop reaches the low temperature of the refueling standard.
The second is cooling water. Because cooling water needs to be replaced every day in summer to avoid exceeding the specified temperature, many users will ignore this in cold winter and think that the water temperature will not increase much in cold weather. So many users often forget to change the water, especially in winter, because the outside temperature is very low, it is difficult to feel the heat of the spindle motor. Therefore, we particularly remind users that cooling water is a necessary condition for the normal operation of the spindle motor. If the cooling water is too dirty, it will cause serious damage to the motor, so as to ensure the cleanness of the cooling water and the normal operation of the water pump.
There is also the problem of cleaning the stainless steel laser cutting machine. Many users who have used the stainless steel laser cutting machine think that the stainless steel laser cutting machine does not need to be cleaned so clean, sometimes it can be cleaned properly. Because they think that the stainless steel laser cutting machine itself will produce a lot of dust in the process of use, and it will be very troublesome to clean it every day, which will easily damage the stainless steel laser cutting machine and reduce its service life. The correct way is to clean the table in time after work, which will provide convenience for the next work. Clean the material scraps near the guide rail and the guide rail to prevent the machine from jamming during operation due to the interference of the scraps. Clean the lead screw regularly to prevent foreign matters sticking on the lead screw. The lead screw is very important in the equipment. It determines the accuracy of the machine, and the lead screw also plays an important role in the transmission process.
The above is what we need to master about the antifreeze operation of stainless steel laser cutting machine. In this cold winter, not only do we need to keep warm and cold, but also your good helper needs better maintenance.