The laser cutting machine occasionally emits light. Redsail laser provides the following solutions:
1. It is caused by unstable power supply voltage of laser cutting machine. A voltage stabilizer can be configured to stabilize the voltage.
2. The optical path is seriously offset due to the dirty or damaged lens. At this time, it is necessary to clean or replace the lens and readjust the optical path.
3. Caused by abnormal water circulation. At this time, it is necessary to clean the water pump and water pipe, and replace the water pump if necessary.
4. It is caused by abnormal water protection of laser cutting machine. Water protection needs to be replaced.
5. Due to aging of laser tube. The laser tube needs to be replaced.
6. Due to the failure of the laser power supply or the main board, the corresponding accessories need to be replaced.
To sum up, if the laser cutting machine occasionally emits light during the normal use of each customer, please check one by one according to the above conditions.