Laser Machine: Tutorial Series on how to set up your Laser Cutter (and more!)

Aprehensive set of video tutorials showing you how to get the most out of your Laser machine.

Wee to the first of a series of videos that aim to teach you how to use a laser cutter.

In this video, Russ reveals his new Lightblade 4060-60 laser cutting and engraving machine and gives an overview of the machine and the supplied RDWorks Software.

Please Subscribe, leavements and let us know what topics you would like to see in future videos.
http://thinklaser/thinklaser-systems/lightblade/

Chapters
1. Looking at the Laser: 3:15
2. Using the Control Panel to set the X & Y axis speed 6:03
3. Adjusting the Max / Min power settings on the control panel 8:01
4. Laser Safety 9:18
5. Laser demonstration – Air Assist 12:48
6. The Milliammeter 15:22
7. Machine safety labelling 16:41
8 Describing the Laser Tube 17:30
9. The Software System Requirements 19:20
10. Introduction to the RDWorks Software 21:58
11. Running Our First Program 32:51

Presented by Russ from Sarbar Multimedia (https://youtube/user/SarbarMultimedia) and using Thinklaser’s Lightblade 4060 – 60 watt flatbed laser system you will be taken in easy stages through
– Machine Set-up,
– Use of the RDWorks Software,
– Maintenance and Alignment
– Troubleshooting
– Building projects
– Laser Safety
– Laser theory
– Laser Cutting
– Laser Engraving
– Materials
– Hints and Tips

If you are new to the world of lasers and are thinking of dipping your toe in the water and purchasing your first laser machine, check out these videos to determine it’s right for you and avoid the potential pitfalls awwaiting you.

Even if you are a seasoned laser user, we’re sure there will be something in this series that will catch your interest, partculary if you are a user of the RDWorks software.
No matter what brand of laser system you currently own, many of the topics to be covered will be of direct interest.

If you are currently in the market for a laser system, please get in touch and ask about our Lightblade range.

Lightblade 3040 – 40 watts (300 x 400mm working area)
Lightblade 3040 – 60 watts (300 x 400mm working area)
Lightblade 4060 – 40 watts (400 x 600mm working area)
Lightblade 4060 – 60 watts (400 x 600mm working area)
Lightblade 6090 – 60 watts (600 x 900mm working area)
Lightblade 6090 – 80 watts (600 x 900mm working area)
Lightblade 6090 – 100 watts (600 x 900mm working area)
Lightblade 1290 – 60 watts (1200 x 900mm working area)
Lightblade 1290 – 80 watts (1200 x 900mm working area)
Lightblade 1290 – 100 watts (1200 x 900mm working area)
Lightblade 1290 – 130 watts (1200 x 900mm working area)
Lightblade 1290 – 150 watts (1200 x 900mm working area)
Lightblade 1490 – 60 watts (1400 x 900mm working area)
Lightblade 1490 – 80 watts (1400 x 900mm working area)
Lightblade 1490 – 100 watts (1400 x 900mm working area)
Lightblade 1490 – 130 watts (1400 x 900mm working area)
Lightblade 1490 – 150 watts (1400 x 900mm working area)
Lightblade 1610 – 60 watts (1200 x 1000mm working area)
Lightblade 1610 – 80 watts (1600 x 1000mm working area)
Lightblade 1610 – 100 watts (1600 x 1000mm working area)
Lightblade 1610 – 130 watts (1600 x 1000mm working area)
Lightblade 1610 – 150 watts (1600 x 1000mm working area)

Optional pass-through port available

If you need something bigger, specials are available up to 1500 x 3000mm bed size.

EFR & Reci tubes used

Finance Available

Looking to mark or engrave metals?
Need YAG or Fibre lasers?
Looking for laser laser automation or integration?

Check out our Lightwriter models at http://thinklaser/thinklaser-systems/lightwriter/

Other videos to from Thinklaser
https://youtube/watch?v=qOMQJj5fVog Laser marking and profile cutting 2 layer films
https://youtube/watch?v=76nXGSPGrEM Rotary Laser Marking of Brass Component
https://youtube/watch?v=2x2EZaf5oG8 Commemorative medals for the Battle of the Somme
https://youtube/watch?v=gO3aPZnyz74
https://youtube/watch?v=SyPIsMQUFas
https://youtube/watch?v=in8qteZYKOY
https://youtube/watch?v=_D-nmfeTjvs&t=23s
https://youtube/watch?v=gCHz4XO_OI4
https://youtube/watch?v=_0cxoEyWhEw Laser Marking introduction with Adrian Norton of Thinklaser

Social Links
Linkedin: https://linkedinpany/thinklaser-limited
Pinterest: https://uk.pinterest/thinklaser/
Twitter: https://twitter/thinklaser?lang=en-gb
Website: http://thinklaser/