Author Archive: BLM GROUP

LT7 tube laser cutting machine | BLM GROUP

LT7 tube laser cutting machine | BLM GROUP

Posted on by



Further information: blmgroup/en/lasertube/lt7

LT7 is a Lasertube system equipped with a 3D laser cutting head and designed to cut: round tubes, squares, rectangles, special sections and open profiles, up to 23 kg/m (15.5 lb/ft) in weight and from 12 mm (.5”) to 152.4 mm (60”) in diameter.

Thanks to its high performance and ability to adapt quickly and automatically to each new production, it lends itself to a wide variety of industrial sectors.

UC5u2F2MLF1nTzM57Hih4maA

laser cutting machine

#LT7 #tube #laser #cutting #machine #BLM #GROUP

LT-FREE – 3D laser cutting | BLM GROUP

LT-FREE – 3D laser cutting | BLM GROUP

Posted on by



Learn more: blmgroup/en/lasertube/lt-free

3D laser cutting with LT FREE by BLM GROUP
Bent tubes, hydroformedponents, tubular assemblies or stamped parts. The LT-FREE 3D laser cutting machine by BLM GROUP is perfect for processing any three-dimensional part.

The LT-FREE 5 axis laser cutting system is ideal for 3D parts, bent, hydroformed or pre-assembled tubes or flat and pressed sheets.

Traditional cutting, drilling, piercing, milling and deburring operations, which are normally carried out in sequence, can now be performed on a single machine in a single cycle.

This makes finished parts without ‘work in progress’ inventory, consequently reducing material handling costs and streamlining the entire production process – as well as downsizing the space needed for storage.

The system is equipped with a fiber laser capable of processing any type of metallicponents (mild steel, copper, aluminum, brass, stainless steel, galvanized steel, etc.) at high speed with excellent quality.

UC5u2F2MLF1nTzM57Hih4maA

laser cutting

#LTFREE #laser #cutting #BLM #GROUP

LT8.20 tube laser cutting machine | BLM GROUP

Posted on by



Further information: https://blmgroup/en/lasertube/lt8.10

The new LT8.10 is a laser tube for those who do not believe inpromises: fiber laser source, tube diameters up to 240 mm and 40 kg/m, 3D tilt cutting, very broad range of configurations available, excellent performance and ease of use.
The fiber laser source enables processing of any metal (copper, aluminum, brass, stainless steel, zinc, iron, etc.) with performance and quality that have been until now unattainable.
TubeCutter, the new 3D cutting head, developed exclusively by BLM GROUP, is bothpact and light, and offers unique cutting performance and quality, particularly when tilt cutting thick wall steel for weld preparations or for making angle bracing or joints in tubular structures.
The capability of selecting different loading and unloading configurations, and the ability to separate different finished parts in different positions makes the LT8.10 the right solution for all types of production needs, for both large and small production lots.

UC5u2F2MLF1nTzM57Hih4maA

laser cutter machine

#LT8.20 #tube #laser #cutting #machine #BLM #GROUP

Sheet Metal Laser Cutting Machine LS5 | BLM GROUP

Posted on by



Further information: https://blmgroup/en_US/laser-sheet-metal/ls5

LS5 is a sheet laser cutting machine created to fulfill a specific need: to provide a modular, fully automated, high-performance system which can be expanded to implement tube cutting functions later in time.

LS5 in sheet only configuration is an advantageous investment because it satisfies an immediate requirement and allows you to access the tube cutting sector at a later date making it still more advantageous.

LS5 can be equipped with either a CO2 laser source with a power of up to 4.5 kW or a fiber laser source with power up to 5 kW. The fiber source is advantageous for cutting high-reflecting materials (brass, copper) and for more effective aluminium processing.

The cutting process is controlled by sensors which monitor all the main parameters on both the CO2 source and fiber versions. Focus is regulated by a servo mechanism fitted inside the cutting head.

UC5u2F2MLF1nTzM57Hih4maA

laser cutter machine

#Sheet #Metal #Laser #Cutting #Machine #LS5 #BLM #GROUP

LT-FREE – 5 axis laser cutting machine | BLM GROUP

Posted on by



Further information: https://blmgroup/en/lasertube/lt-free

The LT-FREE 5 axis laser cutting system is ideal for 3D parts, bent, hydroformed or pre-assembled tubes or flat and pressed sheets.

Traditional cutting, drilling, piercing, milling and deburring operations, which are normally carried out in sequence, can now be performed on a single machine in a single cycle.

This makes finished parts without ‘work in progress’ inventory, consequently reducing material handling costs and streamlining the entire production process – as well as downsizing the space needed for storage.

The system is equipped with a fiber laser capable of processing any type of metallicponents (mild steel, copper, aluminum, brass, stainless steel, galvanized steel, etc.) at high speed with excellent quality.

Possible jobs:
– trimming and piercing on bends
– high quality and accurate cuts, ideal for welding by robots during a later assembly stage
– finishing of hydroformed parts
– piercing anywhere on bent tubes
– preformed sheet trimming
– processing of preassembled frames

UC5u2F2MLF1nTzM57Hih4maA

laser cutting

#LTFREE #axis #laser #cutting #machine #BLM #GROUP

LT360 – 6 axis laser cutting machine | BLM GROUP,BLM GROUP

Posted on by



Further information:

The LT360 6 axis laser cutting system is ideal for 3D parts, bent, hydroformed or pre-assembled tubes or flat and pressed sheets.

Traditional cutting, drilling, piercing, milling and deburring operations, which are normally carried out in sequence, can now be performed on a single machine in a single cycle.

This makes finished parts without ‘work in progress’ inventory, consequently reducing material handling costs and streamlining the entire production process – as well as downsizing the space needed for storage.

The system is equipped with a fiber laser capable of processing any type of metallic components (mild steel, copper, aluminum, brass, stainless steel, galvanized steel, etc.) at high speed with excellent quality.

Possible jobs:
– trimming and piercing on bends
– high quality and accurate cuts, ideal for welding by robots during a later assembly stage
– finishing of hydroformed parts
– piercing anywhere on bent tubes
– preformed sheet trimming
– processing of preassembled frames

BLM GROUP

#LT360 #axis #laser #cutting #machine #BLM #GROUP

3D laser cutting for tubes, structural steel beams and profiles Lasertube LT14 / LT24 | BLM GROUP,BLM GROUP

Posted on by



Further information:

LT14 / LT24 is the automated BLM GROUP Lasertube system for 3D laser cutting of large diameter tubes and structural steels beams. LT14 / LT24 is the right technology for H and IPE beams laser cutting, but also for the production of sections for agricultural and industrial vehicles.
The available versions are the LT14 for processing tubes up to 355 mm (14”) of diameter (min. Ø 25,4 mm) and with a maximum weight of 100 Kg/mt, and the LT24 able to machine tubes up to 508 mm (24”) of diameter (min Ø 50 mm) and with a maximum weight of 200 Kg/mt (up to 3500 kg per tube/profile).
The LT14 / LT24 can be used to cut tubes (round, square and rectangular), open profiles, H-beams or IPE, special profiles.
The ability to efficiently accurately and consistently create any cut geometry in tube or pipe means that the Lasertube LT14 / LT24 it’s a revolution in tube fabrication in different fields: agricultural equipment, industrial vehicles, heavy construction equipement, ship building, oil industry, mining and conveying, crane lifts.

BLM GROUP

#laser #cutting #tubes #structural #steel #beams #profiles #Lasertube #LT14 #LT24 #BLM #GROUP