Maintenance and routine maintenance of engraving machine

1. First, determine whether the voltage of the engraving machine is 220 V or 380 V, and do not carry electricity blindly. 2. Determine whether the voltage meets the requirements. The voltage should be between 210V-230V. If not, a voltage regulator must be used. When selecting the voltage regulator, you must select the one with high quality (power above 2000W, general weight above 15kg).

3. The engraving machine must be grounded to ensure the safety of the machine and avoid static interference.

4. Engraving machine belongs to precision numerical control equipment, which must not be disassembled at will or adjusted electrical accessories without understanding

5. The engraving machine shall be maintained for a long time to ensure the lubrication and frequent dust removal of the machine; Keep the guide rail and lead screw clean and lubricated. 6. Machinery and carving spindle motor must ensure that the circulating water system is unobstructed and the spindle is cooled.

7. Spindle motor protection: If the engraving motor stops or the motor speed is uneven, please cut off the power immediately and repair with our factory. If the motor cannot be powered on when the motor stops running, otherwise the coil of the motor will burn off immediately. Please pay attention when using. 8. Clamping head protection: the motor clamping head and the cutter are fixed by metal friction, so the cutter is installed for refueling to prevent difficult disassembly due to long-time non disassembly or coolant corrosion.