There are many failures of fiber laser cutting machine. However, if the fiber laser cutting machine is found to be faulty, we should use reasonable methods to repair the fiber laser cutting machine in time. However, the reasons for the failure of the fiber laser cutting machine are different, so the solutions we need to take are also different.
Next, let me introduce to you the methods to repair the failure of the fiber laser cutting machine:
1、 The machine is not running: check whether the power line switch of the fiber laser cutting machine is turned on; Check whether the power cord is connected to the power plug and whether it is loose; Check whether the panel power is on.
2、 The pump cannot work normally: check whether the circulating system of the fiber laser cutter is blocked; Check the liquid level of the whole system, ensure whether the pump can receive liquid, and check whether the pump motor can operate.
3、 No cooling or insufficient cooling: check whether the voltage is too low or too high; Check whether excessive heat is transferred to the cooling liquid of the fiber laser cutting machine, which may exceed the cooling capacity of the cooling system.
4、 Insufficient pump suction: check whether the connecting pipe of the fiber laser cutter is restricted; Whether the voltage is too low or the fluid viscosity is too high.
When maintaining the fiber laser cutting machine, we must use the correct method. If the maintenance method is not correct, it will damage the fiber laser and cause damage. If you find that the fault of the fiber laser cutting machine cannot be solved, you can contact the manufacturer to solve it.