After the laser cutting machine has been used for a certain period of time, there may be many problems, among which the extension of its life is one. The metal laser cutting machine needs our efforts to extend its life. It is our common pursuit to buy a machine with a long service life at the same price. Everyone wants the metal laser cutting machine to have a longer service life, but the use of the metal laser cutting machine needs our daily maintenance, Let’s take a look at the methods of prolonging the life of metal laser cutting machines.
Stainless steel laser cutting machine life extension method 1: water replacement and water tank cleaning: it is recommended to clean the water tank and replace the circulating water once a week. It should be noted that the laser tube must be filled with circulating water before the machine works. The quality and temperature of circulating water will directly affect the service life of the laser tube. It is recommended that users use purified water and control the water temperature below 35 ℃. If the temperature exceeds 35 ℃, it is necessary to replace the circulating water or add ice to the water to cool down. (it is recommended that the user use a cooler or use two water tanks.).
Clean the water tank: first turn off the power, unplug the water inlet pipe, let the water in the laser tube automatically flow into the water tank, turn on the water tank, take out the water pump, and remove the dirt on the water pump. Clean the water tank, replace the circulating water, restore the water pump to the water tank, insert the water pipe connected to the water pump into the water inlet, and sort out all joints. Power on the water pump separately and run it for 2-3 minutes (fill the laser tube with circulating water).
Stainless steel laser cutting machine life extension method:
Cleaning of fan: due to long-term use, a lot of solid dust will accumulate in the fan, which will make the fan produce a lot of noise, and is not conducive to exhaust and deodorization. When the suction force of the fan is not enough or the smoke exhaust is not smooth, first turn off the power supply, remove the air inlet and outlet pipes on the fan, remove the dust inside, then stand the fan upside down, pull the blades inside until they are clean, and then install the fan.
Life extension method of stainless steel laser cutting machine: cleaning of guide rail (it is recommended to clean it every half month and shut it down). As one of the core components of the equipment, the guide rail and linear shaft are used to guide and support. In order to ensure high machining accuracy of the machine, its guide rail and linear shaft must have high guiding accuracy and good motion stability. During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece. These smoke and dust will be deposited on the surface of the guide rail and the linear shaft for a long time, which has a great impact on the processing accuracy of the equipment, and will form corrosion spots on the surface of the guide rail and the linear shaft, shortening the service life of the equipment. In order to ensure the normal and stable operation of the machine and the processing quality of products, it is necessary to do a good job in the daily maintenance of guide rails and linear shafts.
In short, if you want to extend the life of the stainless steel laser cutting machine, it is indispensable to do a good job of cleaning and maintenance. If you often let the stainless steel laser cutting machine fall into complicated work without doing a good job of cleaning, it will certainly have a great impact on its life, so we should actively do it in this respect!