The popularity of optical fiber laser cutting machine in the current sheet metal processing industry is very high. It has good cutting effect, neat processing section and other characteristics, and is deeply loved by the sheet metal processing industry. The popularity of optical fiber laser cutting machine is also inseparable from the improvement of manufacturing technology level of the majority of manufacturers.
Good equipment manufacturing technology and high-end brand accessories guarantee the quality of the laser cutting machine. There are various problems in daily processing and production, such as sawtooth on the processing section. Why does this happen? Longtai, the manufacturer of laser cutting machine, analyzes several reasons for you:
01
Machine parallelism
If the parallelism of the laser cutting machine is not installed properly, the equipment will be unstable during processing, resulting in jitter, and the processed material section will have serrations.
02
Vibration of equipment
There are two kinds of vibration of optical fiber laser cutting machine. One is the vibration of the equipment itself when cutting, which will affect the cutting effect. The other is the problem of external equipment, such as the exhaust fan and water tank, which are placed too close to make the equipment vibrate easily.
03
Gear related aspects
When the gear seat slips, it will also cause sawtooth on the processing section.
04
The guide rail is not installed parallel
Sometimes the guide rails in Y direction are not installed in parallel, which may cause jamming during equipment processing, and the sawtooth may also appear on such cutting section.
05
The lenses are not fixed properly
When the lens is not fixed properly, the lens will shake when the device is running, the beam will also vibrate, and the final cutting section will also appear sawtooth.
06
Wear of equipment slider
When the optical fiber laser cutting machine is used for a long time, some sliders will be worn, and there are some foreign matters in the inner ball, which will cause the guide rail to shake during operation, so the problem of sawtooth will occur after processing.
When the sawtooth problem occurs on the section when cutting with the fiber laser cutter, you can press the laser head with your hand to prevent it from shaking. If there is no sawtooth problem after pressing with your hand, it must be the slider problem; If it still appears, you should check the belt, gear and other accessories. If this problem occurs in new machining, it is necessary to consider whether it is not installed properly or whether its control drive and motor do not match.