Building your own Co2 Laser can be rewarding and you can avoid large import duties, shipping and taxes that you would pay on a pre-built laser machine & you get to design it how you want it, to your own specifications.
More Info and Product Information I Use for This Build Can be found on my Website Here – This will be continually added to throughout the build so check back Regularly for Updates.
Stepper Motors, Stepper Drivers and More for your DIY Laser Build at —
The mechanical parts I will be using for this build will be from Cloudray Laser (www.cloudraylaser.com). When building your own machine you have the opportunity to design it the size you want with the material you want to give it a unique and personal look. I have chosen to use Aluminium T-Slot Extrusion for the frame of my machine and I will briefly discuss the design and plan for the machine I plan to build in a future video.
Building your own Co2 Laser Machine requires planning. In this video I go over the main considerations of planning and designing your own laser cutting machine.
Amazon Links.
Honeycomb Table –
CO2 Laser Tube Holders Diameter –
Cloudray CR35 + CR45 Laser Tube –
RECI Laser Tubes –
Mechanical Parts Set Inner Sliding Rails Kit –
Cloudray Laser Power Supply –
10600nm Laser Safety Goggles –
Cloudray Lift Metal Parts with Stepper Motor and Motor Driver –
Red Mushroom Emergency Stop Button –
TROCEN AWC708S Controller –
RIUDA RDC6442 Controller –
Thanks for Visiting.
Until next time, take care
Cheers Matthew
Visit Matt’s Workshop at
Instagram
Facebook
== If you’d like to support my channel financially so I can continue to produce content you can do via PayPal here — — Thank You ====
Any questions please feel free to email me [email protected] or leave a comment below.
DISCLAIMER: The producer of this video under no circumstances can be found liable for negligence by a viewer if they are seriously injured, dies or suffers damage to their property after acting upon or using the content contained in this video production. Any person/s acting on information contained in this video do so at their own risk. The viewer also acknowledges they must follow all local and national laws and regulations when performing any works described in this video production.
NOTE: This is not a paid production or advertisement. The featured products are provided by Cloudray to allow me to provide viewers with an installation / how-to video.
MW Laser
#Build #Co2 #LASER #Cutting #amp #Engraving #Machine #Introduction #Planning #amp #Design