I believe you know the metal laser cutting machine, but it may not be very clear about its maintenance. I don’t know how to carefully maintain it. Now let’s let the editor tell you!
First, use method
It is necessary to check the steel belt frequently to ensure the tension. Otherwise, personal injury or death may result. It is necessary to check the straightness of the track and the perpendicularity of the machine every six months, and timely maintain and debug if it is abnormal. Otherwise, the final cutting quality will be affected.
Second, maintenance method
1. The metal laser cutting machine contains a lot of dirt, so it needs to isolate dust once a week. Clean the guide rail frequently, wipe the dirt and dirt to remove the dirt.
2. Add lubricating oil on the rack to make it lubricated and free of dirt. The guide rail and motor should also be lubricated, which can make the machine move better in the process of moving, make it achieve more accurate cutting, and greatly improve the product quality.
3. If the dual-focus laser cutting head is used for a long time, it will cause damage to the laser cutting head. The metal laser cutting machine needs to be inspected weekly or monthly. If there is a serious problem, the laser cutting head will be deformed and damaged seriously, and finally it needs to be replaced.
If it is not replaced at last, the cutting quality will be affected, and its initial cost will be greatly increased. In addition, secondary processing will also be carried out, and the production efficiency will be greatly reduced. Be sure to check each cutting machine to prevent errors.