Before using the optical fiber laser cutting machine, it is necessary to import the designed drawings into the program, and then use the layout software to arrange the drawings on the board, so that the metal laser cutting machine can process the products in batches. The layout is an important process in the optical fiber laser cutting machine. If the layout is not correct, it will not only reduce the work efficiency, waste the effect of processing materials, but also directly affect the cutting effect of the entire processing materials.
So, what are the important processes in the layout of optical fiber laser cutting machine? What are the layout points of the optical fiber cutter?
1. Corner melting: When cutting corners, reduce the cutting speed, reduce the cutting radius, keep the cutting speed high, and avoid steel plate melting caused by long cutting time, so as to obtain good cutting quality, reduce cutting time, and improve productivity.
2. Spacing between parts: generally speaking, the distance between plates and hot plates is large, because the heat effect of plates is large, and edges are easily burned when cutting corners and small sizes, which affects cutting quality.
3. Lead wire setting: In the process of cutting thick plates with laser cutting machine, in order to ensure good connection of cutting joints and prevent burns at the beginning and end of cutting, transition lines, namely wires and tails, are often introduced at the beginning and end of cutting.
4. Common edge cutting: It is composed of two or more parts, with as many regular graphics as possible. Common cutting can greatly shorten the cutting time and save raw materials.
5. Part collision: In order to maximize production efficiency, many laser cutting equipment operate continuously for 24 hours, using unmanned automatic loading and unloading device, damaging the cutting head and interrupting production.
6. Surplus material handling: After the laser cutting machine finishes cutting parts, it is necessary to remove the skeleton residues on the worktable of the laser cutting equipment as soon as possible to facilitate subsequent cutting operations. For laser cutting equipment without automatic discharge device, the skeleton material can be cut into small pieces for quick removal.