At present, compared with CO2 optical fiber laser cutting machine, optical fiber laser cutting machine has great advantages, and has gradually become a more popular metal processing equipment in the sheet metal processing and sales market. What makes the fiber laser cutting machine have such a huge market?
The following is an in-depth analysis by REDSAIL Laser Equipment Co., Ltd.:
First of all, people should master the principle of the optical fiber laser cutting machine. The optical fiber laser cutting machine is a laser generator that converts electrical energy into concentrated energy, and its photoelectric conversion rate is 30%. Then according to the laser cutting head, the actual effect of laser cutting is compensated by using the program of numerical control machine tool, and the extremely high efficiency of the surface energy concentration of metal materials is obtained. The cutting effect is achieved when the surface of some metals is evaporated by heat and then blown away by inert gas. Laser cutting equipment belongs to thermal laser cutting. Compared with traditional cutting, high-speed punching and other equipment, it has no adverse deformation.
Secondly, from the customer’s point of view, the advantages of optical fiber laser cutting machine equipment are shown in the following levels:
1. Energy saving: In addition to part of the electricity cost and a small amount of gas consumption, the optical fiber laser cutting machine does not need other costs, and can meet the requirements of large and small batch production. If the traditional high-speed punch press is used, the mold cost is also needed, and the processed goods are single. If the mold must be removed to process other products, the mold must be re opened before production. The intelligent coordination ability of optical fiber laser cutting solves this problem well. As long as there are engineering drawings and programming processes, it can be easily produced and processed.
2. Applicability: The application of optical fiber laser cutting machine equipment in the factory can reach the maximum accuracy of three wires due to its high accuracy. Compared with traditional special tools, it saves the secondary grinding and polishing process, reduces the labor of workers and shortens the working time. In addition, the production of processing raw materials and their thin thicknesses are very common. Laser can cut stainless steel plates, copper aluminum, carbon steel and aluminum alloy profiles by cutting iron like mud. At this stage, mass production with a thin thickness of less than 50 mm is feasible.
3. High efficiency: The high efficiency determines the economic benefit. The laser cutting rate of the optical fiber laser cutting machine can reach 100m/min. In other words, compared with the low temperature plasma or the traditional linear cutting machine, the high efficiency cutting of a small piece of steel takes only a few seconds, and the laser cutting efficiency is much faster.