If you’ve used a K40 laser cutter, then you probably know that it’s quite difficult to position the laser for a cut. This leads to you often wasting material around the edges of a cut, where you could have positioned the laser closer, or positioning it too close to the edge and causing the cut...
My Supercarver laser has an opening of 100mm, which stops me engraving onto anything larger than that. In this project I’m investigating what I can do to re-direct the laser to allow me to use materials of ANY SIZE Let me know what you think of this project in the comments, or feel free to...
After building my first personal laser engraver a year and a half ago, Endurance Lasers contacted me about a 10 watt upgrade. I couldn’t refuse. Check this video out to learn more about Endurance Lasers 10 watt laser and how I installed it into my machine. Endurance Lasers: http://endurancelasers.com/ 10 Watt Laser Upgrade: http://endurancelasers.com/diode-lasers/10w-endurance-laser/ Patreon...
![NEJE Master 2S plus laser engraver & cutter with 30w N40630 [unbox, Review, compare]](https://i.ytimg.com/vi/PMq-lsqk8YE/maxresdefault.jpg "NEJE Master 2S plus laser engraver & cutter with 30w N40630 [unbox, Review, compare]")
Hy There, In this wideo i will review another neje machine, it’s Neje master 2S PLUS after some testing i can easily say it’s one of my favorite model, because it’s cost just a bit more than neje 2 and offer much bigger working area, wich is amazing 255 x 420mm and even can be...