Tag Archives: laser cutting machine metal

Standard Operation Procedure of Laser Cutting Machine

Laser cutting machine is an important equipment for sheet metal processing, and correct use of laser cutting machine is also an important prerequisite to improve its service life. Therefore, after purchasing the machine, it is necessary to master the standardized and standardized machine operation processes and methods to reduce the failure rate and improve the […]

How to cut thick plates with laser cutting machine

There are some problems in the processing of medium and thick plates with laser cutting machine. How to solve it? As an advanced material cutting method, laser cutting machine has the advantages of less material waste, obvious cost-effectiveness in large-scale production, strong adaptability to processing objects, and is increasingly accepted by sheet metal manufacturers. Today, […]

The problem of laser cutting machine cutting carbon steel?

When laser cutting machine is used to cut carbon steel, burrs usually appear on the workpiece. Why does this happen? Chuyu Laser will take you to learn. The following are possible causes: (1) Laser focus position shift. Focus position test is necessary. And adjust the offset according to the offset of the laser focus; (2) […]

How to solve the burr caused by laser cutting?

Because laser cutting machine has the advantages of high efficiency, good quality of finished products, flexible processing, etc., it has been increasingly favored by the sheet metal processing industry. However, when some customers use the laser cutting machine, there will be many burrs on the workpiece. Many people think that the quality of laser cutting […]

What to do if the laser cutting machine resets abnormally?

There is always some headache during processing, especially the abnormal reset of laser cutting machine. This is also an issue that everyone pays more attention to. In this case, what should we do? Since its use, the laser cutting machine has attracted much attention. The laser cutting machine is not only used for processing, but […]

How to reduce the loss when cutting thin plates with laser cutting machine?

In recent years, with the development of laser technology and the expansion of market demand, thin fiber laser cutting machine technology has been more and more widely used in the field of metal processing. Thin fiber laser cutting machine is not a cheap equipment. Therefore, we should take good care of them when using them. […]

Before cutting, check the three important parts of the laser cutting machine

In order to improve the accuracy of the laser cutting machine in cutting materials and fast cutting, we need to do some inspection work before the laser cutting machine works normally, so that the laser cutting machine can operate correctly. Let’s say that we need to check these three important parts of the laser cutting […]

What harm does laser cutting machine do to human body?

The main harm of laser to human body is eyes and skin. Laser irradiation of any part of the human body will cause burns. Especially long time laser processing and observation will seriously damage the retina of the eyes, so operators must strictly wear laser protective glasses! It is forbidden to operate and observe the […]

Product added!
The product is already in the wishlist!

Shopping cart