Laser Surgery: http://day-spa-orlando.com/laser/ Home Patient undergoing a full face Juvia fractionated CO2 laser skin resurfacing procedure by Thomas Fiala, MD. This was performed with only local topical anesthetic and the patient tolerated the procedure well. A laser is a single-wavelength source of high-energy coherent light. The high-energy beam of light from a laser can selectively...
Now, the development of laser cutting machine is faster and faster. According to the material cutting thickness required by different industries, the power of laser cutting machine equipment has grown from 100 watts to more than 10000 watts, and the thick steel plate that can be cut has also increased from the initial 1mm to...
In laser cutting machine, some key technologies must be mastered and solved for parts with high cutting accuracy or large thickness. Focus position control is one of them. One of the advantages of laser cutting is the high energy density of the beam, so the diameter of the focus should be as small as possible...
Laser cutting machine is a kind of high-power heavy industrial equipment, its good play can help enterprises improve efficiency, the follow-up work is more smooth, but also reduce costs. Therefore, we should pay attention to operation, and usually pay attention to maintenance and servicing to increase the service life of the equipment, which will effectively...
When customers use laser equipment, they may not be familiar with the equipment and will often incur a lot of costs without reducing the cost of using the laser cutting machine. How customers want to control costs. Next, let’s look at how to control the cost of the laser cutting machine in the operation process....
The technology of optical fiber laser cutting machine has been quite mature, and has a very large market share in the cutting industry. However, there are still many users about how to choose their own laser cutting machine. Next, Chuyu Laser will introduce you how to correctly select the optical fiber laser cutting machine. 1....
After decades of development and application of laser cutting technology, it has become more and more mature, and more and more manufacturers produce laser cutting machine equipment. At present, the types of laser cutting machines are also large, medium and small. Compared with other types of laser cutting machine, the performance of small laser cutting...
Laser cutting machine is an important equipment for sheet metal processing, and correct use of laser cutting machine is also an important prerequisite to improve its service life. Therefore, after purchasing the machine, it is necessary to master the standardized and standardized machine operation processes and methods to reduce the failure rate and improve the...
We custom built these boards using Osage Orange Wood and epoxy with blue pigment. – Here’s What We Used: WOOD: Osage Orange EPOXY (river): EcoPoxy FlowCast (meant for deeper pours) PIGMENT: Black Diamond Pigments “Caribbean” FORM: 36″ by 18″ RESEALABLE FORM LASER: Trotec Laser USA Speedy 400 EPOXY (engraving): EcoPoxy UVpoxy (meant for shallow pours)...
If your made-in-China laser machine has AutoLaser software with it. Then you can use this way to set the main parameters such as table size and pulse. load default settings from motherboard then save it as a file on hard disk before you doing any change on it. I’m Liu Xin in China, I sell...