Combined with the processing and production experience of optical fiber laser cutting machine and their own understanding of products. The following maintenance methods of laser cutting machine are summarized. Now let’s share how to maintain the [Fiber Laser Cutting Machine]! I hope it will be helpful to your laser equipment.
[Optical fiber laser cutting machine] Daily maintenance
Fastening of optical fiber screw and coupling of laser cutting machine
After the movement system works for a period of time, the screws and couplings at the movement joints will become loose, which will affect the stability of the mechanical movement. Therefore, during the operation of the machine, it is necessary to observe whether there are abnormal noises or abnormal phenomena in the transmission parts, and if any problems are found, it is necessary to strengthen and maintain them in time. At the same time, the machine should use tools to firm the screws one by one after a period of time. The first time of firming shall be about one month after the equipment is used.
[Optical fiber laser cutting machine] Daily maintenance
Precautions for optical fiber maintenance of laser cutting machine
1. Timely remove the dirt and dust on the machine body, cutting head, sensor and other parts, so as to keep the machine appearance clean and comfortable;
2. Clean combustibles such as gloves and rags in the machine tool in time to prevent fire during cutting;
3. Clean the iron slag of the laser cutting machine on the waste truck of the leakage hopper in time to ensure that the cutting waste can fall smoothly;
4. Before starting the machine day by day, carefully check whether the pressure of the working gas and the pressure reducing valve work normally to avoid insufficient air pressure affecting the quality of the cutting section;
5. Check whether the two cooling water cycles are normal, so as to avoid affecting the cutting quality or even damaging the optical lens due to poor cooling of the optical lens;
6. Check whether there is any leakage of cooling water at each gas pipe connection of cutting head, so as to ensure the normal supply of gas and cooling water;
7. Before cutting, check the protective lens and focusing lens and clean them in time to ensure the cutting quality and the service life of the focusing lens.
[Optical fiber laser cutting machine] Daily maintenance
Maintenance of optical lens of external optical path of optical fiber machine tool of laser cutting machine
a. Do not touch the surface of the optical lens (reflector, focusing lens, etc.) directly with your hands, which may cause scratches on the lens surface. If there is oil stain or dust on the mirror surface, which will seriously affect the use of the lens, the lens should be cleaned in time.
b. It is forbidden to use water, detergent, etc. to clean optical lenses. The surface of the lens is coated with a special film. If these films are used to clean the lens, the surface of the lens will be damaged.
c. Do not place the lens in a dark and damp place, as this will cause the lens surface to age.
D. The lens surface is stained with dust, dirt or water vapor, which is easy to absorb laser and cause damage to the lens coating; It may affect the quality of the laser beam, or it may not produce laser beam.
e. If the lens is damaged, contact the Han’s Laser After sales Service Department in time to repair it. Try not to use the damaged lens, otherwise it will accelerate the damage of the repairable lens.
f. When installing or replacing the reflector or focusing lens, do not use too much pressure, otherwise the lens will be deformed, which will affect the beam quality.
Daily maintenance of optical fiber laser cutting machine:
Cleaning of optical fiber fan of laser cutting machine
If the fan is used for a long time, a lot of solid dust will accumulate in the fan, which will make the fan produce a lot of noise, and is not conducive to exhaust and deodorization. When the suction of the fan is insufficient and the smoke exhaust is not smooth, first turn off the power, remove the air inlet pipe and air outlet pipe on the fan, remove the dust inside, then turn the fan upside down, pull out the blades inside until it is clean, and then install the fan.