DIY desktop Hobby mini CO2 Laser Engraver Cuter Machine for Wooden Cutting http://china-cncrouter.com/products/SL-1060-100W-DSP-Control-CO2-USB-Laser-Cutter-Laser-Cutting-Engraving-Machine-1000-x-600mm-from-Chin.html#.Wg-qT4R97IU Mail: saleschinacnczone.com Skype: sunny-scotle UCXrphDF-eU1VtNmQvhQERTg laser cutter machine #DIY #desktop #Hobby #mini #CO2 #Laser #Engraver #Cutter #Machine #Wooden #Cutting
The documentation is now ready! https://furtherfabrication.com/resources?category=Y1200 In this episode of the DIY CO2 Laser Cutter / Engraver Build Series, I build the water pump for keeping the laser tube cool & talk quickly about the air assist. Then plug in the laser tube power supply and do a quick test. instagram.com/further_fabrication/ furtherfabrication.com/ //It should go...
After many requests, I have finally put together a guide to make your own rotary module for your K40 laser engraver! This is a surprisingly simple build and will undoubtedly be the best accessory you will have for your K40! While there are 3D printed parts in this project, I have listed alternatives for those...
Here I have taken a Mahoney Laser Power Probe and made some measurements on the actual output power of a 50W chinese ebay laser cutter. The scene of the dial moving was a re-shoot and only goes up to 35W because I released the button a bit short. In careful measurements I do get 36W...
Simple process of replacing laser tube in typical chinese CO2 laser cutter. The replacement tube in this video was a brand called Cole Tech, from an ebay seller. The brand is junk and I got a refund shortly after. Cloudray branded tubes also appear to be junk and should be avoided. The best performing low-cost...
Massive safety improvement: In this video we build a safety switch that disables the K40 laser cutter when the lid is opened. BLOG: http://wayofwood.com/k40-laser-cutter-safety-switch ======= Tools: – Wire stripping tool: https://wayofwood.com/tool/wire-stripping-tool/ – Crimp-on connectors: https://wayofwood.com/tool/crimp-on-connectors/ – Crimping tool: https://wayofwood.com/tool/crimping-tool/ – Micro switch: https://wayofwood.com/tool/micro-switch/ ======= VISIT my website: Home ======= FOLLOW ME on Social Media: Instagram...
Here we have used our K40 laser cutter to engrave a slate coaster and apply gold paint using a masking tape mask. Tools needed: laser cutter slate coasters masking tape duct tape (or any other strong tape) clear lacquer paint (I have used an airbrush but spray paint will be fine) Follow this process step...
The documentation is now ready! furtherfabrication/resources?category=Y1200 After a bit of a hiatus I’m back working on the DIY CO2 laser cutter/engraver. It’s just a quick one this week as I blow the dust off and get things back on track. BTS and more info: instagram/further_fabrication/ furtherfabrication/ UCZ72zDm2feverqV7qAbNH7Q laser cutter #Ep2 #Track #DIY #Laser #CutterEngraver #Build...
Are you still trying to decide whether to purchase a 60 watt or 80 watt C02 Laser Engraver? My name is Ryan with Rise and Grind Workshop and I have some tips and tricks to help you decide which laser engraver you should purchase from OMTECH. If you would like to check out their website,...
As many of you know I’ve been putting money aside for a laser cutter forever. I finally got one! The timing was not great but it looks like it will be ok now. Creality3D Ender3- Less than $200 at GearBest: http://bit.ly/2H1PamO Support my work (but only if you can without hardship)?: ►Tipeee: en.tipeee/naomiwu More from...