#laserengraver #airassist #diodelaser The Ortur Laser Master 3 was supplied to me for a review by Geekbuying but I was not paid to make this video. I would strongly recommend that you use lasers in a proper enclosure with fume extraction. Always read the safety notices and instructions before operating your laser and always make […]
In this video I show you how to install the Ultimate Air Assist Components from Cloudray Laser on a Co2 Laser using a Ruida RDC-644X Controller. The components for this can be found here https://mwlaser.com.au/product/ultimate-air-assist-kit/ This is an awesome addition to the machine, I have recently purchased a second one for the Laser Machine I […]
Sculpfun S30 Pro is the first laser engraver I tested which is equipped with linear rail on X axis. This should result more accurate engraving (less vibrations) even on higher speeds. It also arrives with auto air assist pump, which makes it a great tool for cutting of the wood. There are few suggestions for […]
Is it worthwhile replacing the Air Pump which was shipped with your Co2 Laser Machine, with an Air Compressor? Will it improve the results from your laser machine? Aren’t Air compressors extremely noisy, I don’t want all that noise in my workshop? To address that last question 1st, no not all air compressors are noisy, […]
ATOMSTACK Air Purifier super airflow to remove smoke and dust, quiet and easy to install. Powerful airflow can quickly reduce the surface temperature of the cutting/engraving object, prevent excessive burning, and make the cutting edge cleaner and smoother. UCMO_W4mtYBbTJS23rZS6Oqg laser engraving machine #Atomstack #Air #assist #system #Laser #Engraving #Machine
This week, we’re going to be looking at setting up air-assist and exhaust on a 50w CO2 laser engraver I recently purchased. This machine is similar to the popular k40 laser cutter and other Chinese laser engravers, so the setup process should be similar on most of them. This video second in a series of […]
I’ve seen quite a few people have added an air assist system to their K40 laser cutters. There are a number of reasons given, the most common being improved engraving quality and better cutting performance. There are two commonly used low-cost options, the first is to use an aquarium compressor and the other is to […]
Here is a short video on the new Laser Master 3 by Ortur. It’s a 10W laser diode engraving machine with built in Air Assist and Wi-Fi functionality. Take a look for a quick rundown of features and my thoughts on the machine. Affiliate Links: Ortur: https://s.zbanx.com/r/Gz4XsrLgFuGB Through Aug 31 2022 save $100 with promo […]
ATOMSTACK F30 air assist kit, equipped with 10-30L/min adjustable airflow air pump, can effectively remove the laser cutting or engraving in the process of smoke and dust, to prevent smoke and dust caused by the laser energy decay, to maintain the stability of the laser energy, so that your work to achieve the best results. […]
Introducing the New Jinsoku Laser Engraver: The LC-60A comes with Air Assist System and supports a 600mm x 600mm engraving area. It is built with a Fixed Focus Laser, Emergency Stop Button, Dual Y-axis Motors, 32 Bit Board, Laser Shield, Honeycomb Working Table and so many more! UCbttEpu_up_YlB3_s65rsbQ laser engraver #Jinsoku #LC60A #Laser #Engraver #Cutter […]